Medical Oxygen Regulator Buoy Type Oxygen Inhalator YR-86-3
specifications:
| Name | Medical Oxygen Regulator , Gas Cylinder High pressure gas cylinder
YR-86-3 | | Type | YR-86-3 | | Gas | O2 | | Input pressure | 15MPa | | Output pressure | 0.2 ~ 0.3MPa | | Flow control range | 1-10L/Min , 1-15L/Min | | valve pressure range | 0.35 ± 0.05Mpa | | Output connection screw thread | 8mm | | Valve material | Brass | | Pressure gauge | 50mm | | Bottle material | PVB | | Humidifier capacity | 200ml | | Services | reply to you within 24 hours | | delivery time | 15-25 days |
|
Application:
Medical regulator is used for oxygen breathing in hospital
| Type | Medium | Mettering range (L/min) | Accuracy | Entrance Pressure (MPa) | Exit pressure(MPa) | Entrance connection screw threda | Output connection screw threda |
| YR-86(A) | O2 | 1-10or 1-15 | grade4 | 12MPa
| 0.2-0.3MPa | G5/8-14-RH CGA540-RH G3/4-14-RH | 8mm |
Mainly function :
Oxygen flow range:1-10L/Min 1-15L/Min
Pressure reducing range:2.0-3.0kg
Relief valve pressure range :(3.5kg+0.5kg
Appliance introduction :
1. Before using ,please fill pour clear water into moisture bottle
about one third reaching water
line site.
2. DF-2 blind nut straw into bolt head ,make the pipe of flow meter
square water line.
3. Put off regulator (9),put on oxygen tube switch ,so you will the
data from needle position of pressure gauge (2).At last ,straw flow
on/off at anti-clock wise accroding to patients need,
adjust switch.
4. If patient need oxygen for a long time ,can use nose pipe to
help patient absorb oxygen.
5. Moisture bottle(20) circles at clockwise,adjust (17)oxygen hole
to other site.
Attention point :
1. Before using the suction ,you will check all parts bad or good
and clean it by drying choth .
2. Pressure gauge (2),regulator(3) no oil ,otherwise explode.
3. Clearwater in moistyre bottle keeps clean.
4. There is adjustable nut(6) in the front of plunder shall be
straw at clockwise .
5. Relief value(7)(15) keeps out of danger.
6. Oxygen dosage is decided by doctor.
7. After using suction,put off the oxygen tube switch,make rest
oxygen out,pressure gage to
zero site,last put off flow switch if using again,first put on the
oxygen tube switch,avoid
exploding.
8. The product must be examined periodical,at least once every 6
month.
Advantage:
1. Low MOQ: It can meet your promotional business very well.
2. OEM Accepted: We can produce any your design.
3. Good Service: We treat clients as friend.
4. Good Quality: We have strict quality control system .Good
reputation in the market.
5. Fast & Cheap Delivery: We have big discount from forwarder
(Long-term Contract).
